Makita 9741 Wheel Sander

Product Information

I do have an LS130 and I know I could make my own profile for it, but with the quantity of material we're talking here and the slow pace at which I know that sander works, I'm not sure it's worth the time commitment. I switched over to the 80 grit nylon brush to do the other side of the board, but after reviewing the pictures, I noticed that that side started out much lighter, so I thought it wouldn't be a fair comparison. The client agreed that preserving the rough sawn effect was more desirable, but was intrigued by the color variation produced by sanding, so I suggested that working the face with the more aggressive wire brush might be a solution: https://www. The content contained on this site is provided for informational purposes only and does not constitute professional advice. Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread.

The STC2 brush back sander is ideal for finishing, sanding, cleaning , denibbing and sanding straight or curved profiles and furniture components. It took 20-25 minutes to brush the entire face with the wire wheel, working mostly long and occasionally cross grain, and applying significant pressure (not so much that my arms tired, though). The grain raising effect is clearly more dramatic than just working the surface with the 80 grit nylon wheel, and the amount of time it took was significantly reduced.I do not want them to sand the boards down at this stage of the process as I like to leave lots of character. Now the edge breaking in the wood before stain and sealer makes the brush sanders not break through the edges in the sealer coat. I highly doubt a major company like MasterBrand is going to remove a machine that isn’t capable of achieving the quality of finish they are looking for, and replace it with another manufacture just because it’s new and bright and shiny. FOB Queensbury, NY - You will be contacted with a freight quote or you can arrange your own freight.

After peeling and just before scribing and setting, the logs were cleaned and shaped with a Makita curve base planer which worked great and produced a very nice "draw knife" appearance. It is also commonly used in raw wood sanding to open the grain for stain, and then used for sealer sanding in between coats of stain or primer simply by changing the grit of flatter strip. It's nice that I don't have to worry and toil about prepping the timber, and can simply attack it with my new toy.The Unosand hub and sanding brush system will integrate into existing sanding and denibbing systems. The main problem if trying to actually "sand" with them is that the force is too concentrated in a small area, so softer parts of the wood are removed more aggressively and harder parts less so. You have to apply more pressure than with the nylon wheel, and work each section for a longer period of time.